Manage Runoff with Vegetated Buffers

To protect water resources and comply with increasing regulation, greenhouse managers are wise to make changes to prevent pollutants, such as fertilizers, pesticides, and container media from ending up in surface and ground waters. One way to do this is to use vegetated buffers.

Vegetated buffers are areas or strips of land maintained in permanent vegetation to prevent erosion and improve water quality by trapping and treating contaminants. Vegetative buffers can also provide many other benefits such as increasing beneficial insects for biological control of crop pests and protecting streambanks. In addition, they can be used for green waste and secondary crop production.

Some examples include vegetated buffers are bioswales, vegetated filter strips, and constructed wetlands.

• A vegetated bioswale is a stormwater conveyance system that channels stormwater. This type of buffer system improves water quality by reducing flow velocity and increasing sedimentation, filtering pollutants, and allowing infiltration into the underlying soils.

• A filter strip is a band of vegetation that can be used between a greenhouse and a waterbody. The purpose of the filter strip is to slow runoff from the production area and trap sediment, fertilizers, and pesticides before they reach surface water.

• A constructed wetland is an artificial marsh or swamp for treating wastewater, controlling flood waters, and reducing erosion. In greenhouse production, they can be built to further remove pollutants in the effluent from a retention basin.

Although there are different types of vegetative buffer systems, most work in a similar manner. Runoff containing soluble nutrients and pesticides, and sediments with adsorbed pesticides, enters the buffer. Vegetation in the buffer slow surface flow and sediments drop out. Some water infiltrates into the root zone and subsoil, while the remainder becomes lateral subsurface flow. When the roots of buffer plants grow to sufficient depth, they intercept infiltrated water, taking up the soluble nutrients and pesticides. Pesticides adsorbed to soil particles become trapped in the root zone, and high soil organic matter provides conditions for denitrification and pesticide degradation.

Things to consider before constructing a vegetative buffer.

When planning and designing a vegetative buffer, it is best to consult a licensed engineer or the Natural Resources Conservation Service (NRCS). Buffers need to be designed and constructed to comply with all federal, state, and local laws and regulations.

Plant species that are used in buffers should be selected based on their adaptability and tolerance to site conditions. Check local information sources, such as the NRCS and Cooperative Extension, before making selections. Some points to consider are: cost, growth rate, potential of plant invasiveness if not using native plant species, and the ability to use the buffers for producing secondary crops. Growers who are interested in developing techniques to produce secondary crops in vegetative treatment systems should contact Cooperative Extension and the NRCS for guidance.

Planting should be timed so buffers are established prior to expected runoff. Maintenance of vegetative buffers is necessary to sustain buffer function and effectiveness.

The information above was extracted from a larger document, written by Ventura County Cooperative Extension Farm Advisor, Julie Newman. Please contact us if you would like to read the original document in its entirety.